Using 13.56 MHz contactless smart card technology, the iCLASS
RWK400 provides a powerful solution. Combine a contactless card presentation
with a personal identification number (PIN) to support dual authentication of
identity. Or, configure the panel for single-factor authentication, using only a
card or a PIN.
The PIN can be verified either at the access control panel or
locally by the keypad reader. When verified locally, the PIN must be programmed
into the iCLASS card.
The RWK400 offers the same features as the RK40, with the extended
ability to read/write user data to HID iCLASS credentials. Read/write
applications include the storage/retrieval of data such as biometric templates,
health records, time and attendance, and digital cash. The possibilities are
endless!
 Installation Guide
Model Numbers
6131CxT (Wiegand and RS232)
6131Cx4 (Wiegand and Full Duplex RS485)
6131CxU (Wiegand and USB)
6131CxB (Wiegand and UART)
** Read Range
iCLASS Card: Up to 4” (10.2 cm)
iCLASS Key/Tag: Up to 1.25” (3.2 cm)
MIFARE / DESFire Card (CSN): Up to 2” (5.1 cm)
Mounting
The RWK40 is designed to mount and cover single gang switch boxes primarily used in the United States and includes a slotted mounting plate for European and Asian back box spacing.
Dimensions
3.3” x 4.8” x 1.0”
8.4 cm x 12.2 cm x 2.4 cm
Power Supply
5-16 VDC, Linear supply recommended
Current Requirements
85mA AVG, 132mA PEAK
Operating Temperature
-31º to 150º F (-35º to 65º C)
Operating Humidity
5% to 95% relative humidity non-condensing
Transmit Frequency
13.56 MHz
Cable Distance
Wiegand/Clock-and-Data Interface 500ft (150m) (22AWG), RS232 50ft (15m), RS485 4000ft (1220m), USB 16ft (4m), UART 25 ft (7 m)
Card Compatibility
•15693 - read / write; 2k bit (256 Byte), 16k bit (2k Byte), 32k bit (4k Byte) iCLASS credentials, read-only serial number
•14443B - read / write; 2k bit (256 Byte), 16k bit (2k Byte), 32k bit (4k Byte) iCLASS credentials, read-only serial number
•14443A - read only; MIFARE® and DESFire (serial number)
Environmental
IP55
Certifications
UL294/cUL (US), FCC Certification (US), IC (Canada), CE (EU), C-tick (Australia, New Zealand),
SRRC (China), MIC (Korea), NCC (Taiwan), iDA (Singapore), RoHS
Housing Material
UL94 Polycarbonate
Warranty
Warranted against defects in materials and workmanship for life. (See complete warranty policy for details.)
**Dependent upon installation conditions.
*** Add 40mA current draw for USB expansion module. Add 10mA current draw for RS232, RS485 and UART expansion modules.
|
